Key Reader - Paytec Eagle User Manual

Key reader

The changegiver EAGLE can be connected with either of the following key readers Paytec (on demand).
CAIMAN
CAIMAN Mifare
The key reader must be plugged on the inner connector J9 (see p.12).
The options about credit (free credit, free vends, bonus menu) are valid both for PIT keys and for Mifare
The functions described for the use of keys/cards are only valid for Paytec key readers (other cashless readers
MDB can only be connected as peripheral units MDB).
Function list
Fn 06 ....... Key format, key codes, auto-programming keys (PIT keys only).
Fn 22 ....... Parameters about free credit.
Parameters about free vends and special discounts for keys type1 (daily/monthly free vends and
special discounts).
Fn 36 ...... Parameters about free vends and special discounts for keys type98 (daily/monthly/periodical free
vends and special discounts).
Fn 18 ...... Parameters about fictitious credit (to give free credit with protocol Executive).
Fn 20 ...... Options to inhibit free credit and free vends for each selection number.
Auto-programming keys
EAGLE makes it possible to format Paytec "auto-programming" keys with the Paytec key reader connected. This
function is only available for PIT keys.
"Caiman" Programmers (tabletop units designed to format keys manually – special options about discounts) are
available on demand.
Credit on keys
Credit can be loaded on keys (either with bills or coins) up to the max. value programmed in Fn00.
Max. credit chargeable : 65535 units (€ 655.35).
Each key is formatted with a PIN and two more security codes (operator code and location code); the same
codes must be programmed on EAGLE (Fn06), otherwise keys are not accepted.
for PIT keys
®
for Mifare
®
keys/cards
36
® keys/cards.