Fn26 – Country Code
Only for protocol MDB
Country code
(MDB)
Fn27 – Conversion keys
"Conversion keys" is a special function permitting operators to re-encode Paytec keys from the key reader
connected.
®
Keys/cards Mifare
only permit operators to modify their format.
Modifiable parameters
Key/card format: key1/card1 to key98/card98
▪
Operator code
▪
Location code
▪
User code
▪
Pin 1
▪
Pin 2
▪
Whenever a key is inserted, the parameters in Fn06 are first checked. If a parameter is not correct, the same
parameter in Fn27 is also checked. When the two parameters are the same, the key is converted (the Led is
steady RED during conversion). Once the conversion sequence has been successfully completed, the Led is
GREEN and the key is ready for use.
Should an error occur during conversion, the Led is YELLOW and an error code is displayed (see table containing
error codes in user guide).
Parameters in Fn27
Convert
Keys ?
Convert Type 1
in Type 98 ?
Old operator
Code
-----
Old location
Code
-----
Modify user
code?
Enter international phone code.
--
Y Key codes can be modified.
Y Key format can be modified.
Enter old operator code.
Enter old location code.
Y User code can be modified.
Y
59