Fn35 - Token - Paytec Eagle User Manual

Fn35 – Token
You can either prevent the system from giving change for payments with tokens, or you can accept both coins
and tokens.
If you wish to give change for payments with tokens, a token channel must be programmed (a token channel is
recognized through a special option in Fn03).
This option prevents the system from being misused as a money changer.
How to create a token channel (Fn03)
Coin No. --
token ? Y
Parameters to customize token channel
No change
with token ?
N
Block change
with token ?
Inhibit Mix
Coins/Tokens ?
Inhibit reload
with token ?
After the token has been programmed in one of the 30 channels, select the
channel no. in Fn03 and set Y in the option "Token" (press
N The system delays giving change (see option "block change").
Y Residual credit is cancelled and no change given.
With "Y" the next parameter "Block change with token" is skipped.
The credit cancelled is stored in Audit as "overpay".
N The system always gives change (even when a vend has been paid with
tokens).
Y Change is not given for payment with tokens; residual credit is either cleared
or displayed for three minutes.
N Both coins and tokens are accepted.
Y Either coins or tokens are accepted. If a coin is inserted first, no tokens are
accepted (the opposite is also true).
The starting condition is restored after a purchase (credit = 0).
N Keys can be recharged with tokens.
Y This option prevents users from recharging keys with tokens
Tokens are not accepted to recharge a key; tokens/coins are not accepted after
a key has been inserted and viceversa.
Keys can be recharged with cash only (no tokens mixed with coins).
Go to Fn15 to inhibit key recharge with cash.
66
to confirm).