Draytek Vigor2862 Series User Manual page 948

T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure the external or internal server used by Vigor router for
wireless authentication.
S y n t a x
S y n t a x
wl set8021x –t [0/1]
wl set8021x –v
S y n t a x
S y n t a x
Parameter
-t
-v
E x a m p l
E x a m p
> wl set8021x -t 1
% <Note> Please restart wireless after you set the parameters.
> wl set8021x -v
802.1X type is : Local 802.1X
>
T e l n e t C o m m
T e l n e t C o m m
This command allows users to configure settings for Band Steering (2.4GHz).
S y n t a x
S y n t a x
wl bndstrg show
wl bndstrg enable [1/0]
wl bndstrg chk_time [value]
S y n t a x
S y n t a x
Parameter
show
enable [1/0]
chk_time [value]
E x a m p l
E x a m p
> wl bndstrg show
band steering: disable
chk_time: 15 sec
932
a n d : w l s e t 8 0 2 1 x
a n d : w l s e t 8 0 2 1 x
D e s c r i p t i o n
D e s c r i p t i o n
Description
Specify the type (external or internal) of wireless authentication
server.
0 – Indicate the external RADIUS server.
1- Indicate the local 802.1x server.
View the settings of 802.1x.
e
l e
a n d : w l b n d s t r g
a n d : w l b n d s t r g
D e s c r i p t i o n
D e s c r i p t i o n
Description
Display current status for Band Steering function.
It means to enable wireless 2.4GHz AP client mode.
1 – enable
0 – disable
If the wireless station does not have the capability of 5GHz network
connection, the system shall wait and check for several seconds (15
seconds, in default) to make the 2.4GHz network connection.
Specify the time limit for Vigor router to detect the wireless client.
[value] – 1 to 60 seconds.
e
l e
Vigor2862 Series User's Guide