Draytek Vigor2862 Series User Manual page 237

I I - 5 - 1 2 - 1
I I - 5 - 1 2 - 1
Open Applications>>High Availability to bring up the configuration page to configure High
Availability.
Available settings are explained as follows:
Item
Enable High Abailablity
Redundancy Method
Vigor2862 Series User's Guide
G e n e r a l S e t u p
G e n e r a l S e t u p
Description
Check this box to enable HA function.
Select the redundancy method for high availability.
Hot-Standby -
Such method is suitable when there is only one ISP account.
When this method is selected,


During normal operation the secondary router will be
idling. When the primary router fails to operate
normally, the secondary router(s) will take over.
WAN settings of the primary and secondary routers are
identical.
Note: When Hot-Standby is used, the wireless LAN
function on secondary router will be "disabled"
directlly. Clients can not connect to the secondary
221