Draytek Vigor2862 Series User Manual page 873

%% Status: Enable
%% Comment: games
%% Private IP address: 192.168.1.100
Index
*****************************************************************
1.
%% Status: Disable
%% Comment:
%% Private IP address: 0.0.0.0
Index
*****************************************************************
%% Status: Disable
%% Comment:
%% Private IP address: 0.0.0.0
Index
*****************************************************************
>
T e l n e t C o m m
T e l n e t C o m m
This command allows users to set port redirection table for NAT server.
S y n t a x
S y n t a x
srv nat portmap add [idx][serv name][proto][pub port][pri ip][pri port][wan1/wan2]
srv nat portmap del [idx]
srv nat portmap disable [idx]
srv nat portmap enable [idx] [proto]
srv nat portmap flush
srv nat portmap table
S y n t a x
S y n t a x
Parameter
Add[idx]
serv name
proto
pub port
pri ip
pri port
wan1/wan2
del [idx]
disable [idx]
enable [idx]
flush
Vigor2862 Series User's Guide
Protocal
TCP 23
Protocal
Protocal
a n d : s r v n a t p o r t
a n d : s r v n a t p o r t
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to add a new port redirection table with an index number.
Available index number is from 1 to 10.
It means to type one name as service name.
It means to specify TCP or UDP as the protocol.
It means to specify which port can be redirected to the specified
Private IP and Port of the internal host.
It means to specify the private IP address of the internal host
providing the service.
It means to specify the private port number of the service offered
by the internal host.
It means to specify WAN interface for the port redirection.
It means to remove the selected port redirection setting.
It means to inactivate the selected port redirection setting.
It means to activate the selected port redirection setting.
It means to clear all the port mapping settings.
Start Port End Port
83
Start Port End Port
Start Port End Port
m a p
m a p
857