Ii-5-6-2 Active Directory / Ldap Profiles - Draytek Vigor2862 Series User Manual

After finished the above settings, click OK button to save the settings.
I I - 5 - 6 - 2 A
I I - 5 - 6 - 2 A
You can configure eight AD/LDAP profiles. These profiles would be used with User
Management for different purposes in management.
Click any index number link to open the following page.
Available settings are explained as follows:
Item
Name
Common Name Identifier
Additional Filter
Base Distinguished Name
/ Group Distinguished
Name
Vigor2862 Series User's Guide
c t i v e D i r e c t o r y / L D A
c t i v e D i r e c t o r y / L D
Description
Type a name for such profile. The length of the user name is
limited to 19 characters.
Type or edit the common name identifier for the LDAP server.
The common name identifier for most LDAP server is "cn".
Type the condition for additional filter.
Type or edit the distinguished name used to look up entries on
the LDAP server.
Sometimes, you may forget the Distinguished Name since it's
too long. Then you may click the
account information on the AD/LDAP Server to assist you finish
the setup.
P P r o f i l e s
A P P r o f i l e s
button to list all the
209