Draytek Vigor2862 Series User Manual page 158

S t a t i c I P
S t a t i c I P
If your ISP provides a static IPv6 address for you, you may configure that IPv6 address for WAN
by doing the following steps:
1. Set Connection Type to Static IPv6.
2. Enter the IPv6 address and Prefix Length which provided by the ISP, and click Add.
3. You should see the IPv6 address in Current IPv6 Address Table. Then, specify the IP
address of IPv6 Gateway.
142
v 6
v 6
Vigor2862 Series User's Guide