Draytek Vigor2862 Series User Manual page 312

Channel
Hide SSID
SSID
Isolate
Schedule Profiles
Enable Special SSID
Schedule Profiles
After finishing all the settings here, please click OK to save the configuration.
296
Means the channel of frequency of the wireless LAN. The
default channel is 6 (for 2.4GHz) / 36 (for 5GHz). You may
switch channel if the selected channel is under serious
interference. If you have no idea of choosing the frequency,
please select Auto to let system determine for you.
For 2.4GHz:
Check it to prevent from wireless sniffing and make it harder
for unauthorized clients or STAs to join your wireless LAN.
Depending on the wireless utility, the user may only see the
information except SSID or just cannot see any thing about
Vigor wireless router while site surveying. The system allows
you to set four sets of SSID for different usage. In default,
the first set of SSID will be enabled. You can hide it for your
necessity.
Means the identification of the wireless LAN. SSID can be any
text numbers or various special characters.
Member –Check this box to make the wireless clients
(stations) with the same SSID not accessing for each other.
VPN – Check this box to make the wireless clients (stations)
with different VPN not accessing for each other.
Set the wireless LAN to work at certain time interval only.
You may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always
work.
Selected SSID (2 /3 /4) will be forced up /down based on the
schedule profile used.
For 5 GHz:
Vigor2862 Series User's Guide