Draytek Vigor2862 Series User Manual page 611

Profile Name
Device Name
Action
Schedule
Now
H o w t o a
H o w t o a
Follow the steps below to create a new maintenance profile.
1. Click any index number link, e.g., Index 1.
2. The Maintenance dialog appears.
Info
Available parameters are listed as follows:
Item
Enable
Only Run Once
Profile Name
Device Name
Router Name/
Vigor2862 Series User's Guide
Display the name of the maintenance profile.
Display the name of the managed CPE that the maintenance
profile will apply to.
Display the action that managed CPE shall accept.
Display the schedule profiles selected for such profile.
The action will be performed for the selected CPE
immediately.
d d a n e w M a i n t e n a n c
d d a n e w M a i n t e n a n c
When restoring configuration to a CPE, make sure the configuration
file you selected was backup from this CPE before. Because restoring
from another device's configuration file may cause serious problem
(e.g., Both devices have different ISP username/ password. Restoring
configuration from one CPE to the other will cause Internet
connection not being online).
Description
Check it to enable such profile.
Check it to activate such profile running for once.
Type the name of the maintenance profile.
The drop down list will display all the CPE devices detected by
Vigor2862 series. Choose the one which will be applied with
such new created profile.
It displays the name and model of Vigor router.
e P r o f i l e
e P r o f i l e
595