Draytek Vigor2862 Series User Manual page 267

S t a t i c R o
S t a t i c R
You can set up to 40 profiles for IPv6 static route. Click the IPv6 tab to open the following
page:
Available settings are explained as follows:
Item
Index
Enable
Destination Address
Set to Factory Default
Viewing IPv6 Routing
Table
Click any underline of index number to get the following page.
Available settings are explained as follows:
Item
Enable
Destination IPv6 Address /
Prefix Len
Gateway IPv6 Address
Vigor2862 Series User's Guide
u t e f o r I P v 6
o u t e f o r I P v 6
Description
The number (1 to 40) under Index allows you to open next
page to set up static route.
Check the box to enable the static route profile.
Displays the destination address of the static route.
Clear all of the settings and return to factory default
settings.
Displays the routing table for your reference.
Description
Click it to enable this profile.
Type the IP address with the prefix length for this entry.
Type the gateway address for this entry.
251