Draytek Vigor2862 Series User Manual page 21

2.4G/5G/WLAN
VPN
DMZ
LED on Connector
LAN
P1~P4
P5 /
WAN2
Vigor2862 Series User's Guide
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
Left On
LED
Off
Blinking
Right On
LED
Off
Left On
LED
Off
Blinking
Right On
LED
Off
Slowly: LTE device is in dialing up.
Quickly: The data is transmitting.
2.4G/5G: Wireless access point with bandwidth of
2.4GHz/5GHz is ready.
WLAN: Wireless access point is ready.
Wireless function is disabled.
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and simultaneously
when WPS is working, and will return to normal
condition after two minutes. (You need to setup WPS
within 2 minutes.)
The VPN tunnel is active.
VPN services are disabled.
Traffic is passing through VPN tunnel.
The DMZ function is enabled.
The DMZ function is disabled.
The data is transmitting.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
5