Draytek Vigor2862 Series User Manual page 386

Certificate Authentication
After finishing all the settings here, please click OK to save the configuration.
V - 1 - 7 - 2 C
V - 1 - 7 - 2 C
The settings on this page can be downloaded as a file. Later, such file can be imported and
applied to remote end's CPE (as VPN client). Then, a private connection via OpenVPN tunnel
between the server and the client can be connected successfully.
Available settings are explained as follows:
Item
Remote Server
Transport Protocol
Config Finename
CA cert
Client cert
Client key
370
If certificate authentication is required for OpenVPN, simply
check the box to apply the trusted CA certificate and local
certificate for OpenVPN tunnel.
Certificate authentication can offer more secure VPN tunnel
between the client and the router.
l i e n t C o n f i g
l i e n t C o n f i g
Description
Click IP and use the drop down list to specify an IP address of
WAN for VPN connection. Or click Domain to enter a domain
name for the remote server.
Simply choose UDP or TCP as protocol for building OpenVPN
connection between the server and the remote client.
Enter a name for the configuration file.
Enter the certificate authority (CA) file name obtained from
3rd party provider
Each client in an OpenVPN connection must have its
certificate and private key.
Enter the certificate file name obtained from 3rd party
provider
Enter the private key file name obtained from 3rd party
Vigor2862 Series User's Guide