Draytek Vigor2862 Series User Manual page 163

Available settings are explained as follows:
Item
General Setup
DHCP Server Option
Vigor2862 Series User's Guide
Description
Allow to configure settings for each subnet respectively.
Index - Display all of the LAN items.
Status- Basically, LAN1 status is enabled in default.
LAN2 –LAN6 and IP Routed Subnet can be observed by
checking the box of Status.
DHCP/DHCPv6- LAN1 is configured with DHCP/DHCPv6 in
default. If required, please check the DHCP box for each
LAN.
IP Address - Display the IP address for each LAN item. Such
information is set in default and you can not modify it.
Details Page - Click it to access into the setting page. Each
LAN will have different LAN configuration page. Each LAN
must be configured in different subnet.
IPv6 – Click it to access into the settings page of IPv6.
DHCP packets can be processed by adding option number and
data information when such function is enabled.
147