Draytek Vigor2862 Series User Manual page 141

Click any index (8~10) to get the following web page:
Available settings are explained as follows:
Item
Enable Channel 8/9/10
WAN Type
General Settings
Vigor2862 Series User's Guide
Description
Click it to enable the configuration of this channel.
The connections and interfaces created in every channel may
select a specific WAN type to be built upon. In the Multi-PVC
application, only the Ethernet WAN type is available. The
user will be able to select the physical WAN interface the
channel shall use here.
VPI - (Available when WAN Type is ADSL) Virtual Path
Identifier. Contact your ISP or carrier for the appropriate
value.
VCI - (Available when WAN Type is ADSL) Virtual Channel
Identifier. Contact your ISP or carrier for the appropriate
value.
Protocol - (Available when WAN Type is ADSL) Access
protocol used for the ADSL connection. Contact your ISP or
carrier for the appropriate setting.

PPPoA: Point-to-Point over ATM.

PPPoE: Point-to-Point over Ethernet.

MPoA: Multiprotocol over ATM.
125