Draytek Vigor2862 Series User Manual page 499

Bandwidth Utilisation
Notification Settings
After finishing all the settings here, please click OK to save the configuration.
Vigor2862 Series User's Guide
port, minimum keep alive period and maxmum keep alive
period respectively.
To administrator, this feature is useful to monitor the
bandwidth utilization of CPE(s). When the bandwidth used is
over the threshold level (percentage defined in medium and
high fields), a notification will be sent to VigorACS. After a
long time observation, the administrator can determine if it
is necessary to increase the bandwidth setting for that CPE or
not.
Disable - The default is Disable.
Enable – Click it to enable such feature.
 Time Period – Choose the time interval (15 mins, 30
mins, 1hour, 3 hours, or 6 hours) for CPE to send a
notification of bandwidth utilization to VigorACS.
 WAN – Choose the WAN interface for applying the
bandwidth utilization notification mechanism.
Threshold Level – Set the percentage of bandwidth in

transmission and receiving data as threshold values for
CPE to detect bandwidth utilization.
Line Speed – Set the transmission rate and receiving

rate for specified WAN interface.
483