Draytek Vigor2862 Series User Manual page 409

A d v a n c e
A d v a n c e
Available settings are explained as follows:
Item
Profile Name
Load Balance Algorithm
VPN Load Balance Policy
Vigor2862 Series User's Guide
d L o a d B a l a n c e
d L o a d B a l a n c e
Description
List the load balance profile name.
Round Robin – Based on packet base, both tunnels will send
the packet alternatively. Such method can reach the balance
of packet transmission with fixed rate.
Weighted Round Robin –Such method can reach the balance
of packet transmission with flexible rate. It can be divided
into Auto Weighted and According to Speed Ratio. Auto
Weighted can detect the device speed (10Mbps/100Mbps)
and switch with fixed value ratio (3:7) for packet
transmission. If the transmission rate for packets on both
sides of the tunnels is the same, the value of Auto Weighted
should be 5.5. According to Speed Ratio allows user to
adjust suitable rate manually. There are 100 groups of rate
ratio for Member1:Member2 (range from 1:99 to 99:1).
Below shows the algorithm for Load Balance.
Edit – Click this radio button for assign a blank table for
configuring Binding Tunnel.
Insert after – Click this radio button to adding a new binding
393