Draytek Vigor2862 Series User Manual page 316

Available settings are explained as follows:
Item
Enable Mac Address Filter
MAC Address Filter
Client's MAC Address
Apply SSID
Attribute
Comment
Add
Delete
Edit
Cancel
OK
Clear All
Backup Access Control
Upload From File
After finishing all the settings here, please click OK to save the configuration.
300
Description
Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
(expressed by MAC addresses) listed in the box can be
grouped under different wireless LAN. For example, they can
be grouped under SSID 1 and SSID 2 at the same time if you
check SSID 1 and SSID 2.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
After entering the client's MAC address, check the box of the
SSIDs desired to insert this MAC address into their access
control list.
s: Isolate the station from LAN - select to isolate the
wireless connection of the wireless client of the MAC address
from LAN.
Type a brief description for the specified client's MAC
address.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
Click it to save the access control list.
Clean all entries in the MAC address list.
Settings on this web page can be saved as a file which can be
restored in the future by this device or other device.
Restore wireless access control settings and applied onto this
device.
Vigor2862 Series User's Guide