2.
Go to LAN >> General Setup, click on Details Page for LAN 2.
3.
Set up TCP/IP details for LAN 2,
a. Enable LAN2.
b. Select For Routing Usage.
c. Enter the IP Address for the router. Note that this could be the same as router's WAN
d. Enter the Subnet Mask according to ISP.
4.
For DHCP Server Configuration, we may either:
270
IP.
Disable DHCP Server, and manually set a fixed IP/Subnet Mask on the host.
Enable DHCP Server, and set up the DHCP IP pool according to IP range which the
ISP provides.
Vigor2862 Series User's Guide