Draytek Vigor2862 Series User Manual page 895

-b[Bridge mode]
E x a m p l
E x a m p
> fullbrg status ?
Show gConfig setting of full bridge
WAN 1 full bridge to LAN 1, mode=OFF.
WAN 2 full bridge to LAN 1, mode=OFF.
WAN 5 full bridge to LAN 1, mode=OFF.
WAN 6 full bridge to LAN 1, mode=OFF.
WAN 7 full bridge to LAN 1, mode=OFF.
WAN 8 full bridge to LAN 1, mode=OFF.
WAN 9 full bridge to LAN 1, mode=OFF.
WAN10 full bridge to LAN 1, mode=OFF.
> fullbrg set -i 2 -n 5 -b 1
Configure OK! Please reboot device to make it effective.
> sys reboot
> fullbrg status
Show gConfig setting of full bridge
WAN 1 full bridge to LAN 1, mode=OFF.
WAN 2 full bridge to LAN 5, mode=ON.
WAN 5 full bridge to LAN 1, mode=OFF.
WAN 6 full bridge to LAN 1, mode=OFF.
WAN 7 full bridge to LAN 1, mode=OFF.
WAN 8 full bridge to LAN 1, mode=OFF.
WAN 9 full bridge to LAN 1, mode=OFF.
WAN10 full bridge to LAN 1, mode=OFF.
T e l n e t C o m m
T e l n e t C o m m
This command can display debug message on the screen.
S y n t a x
S y n t a x
voip debug [flush]
voip debug [showmsg]
S y n t a x
S y n t a x
Parameter
flush
showmsg
E x a m p l
E x a m p
> voip debug showmsg
-->Send Message to 192.168.1.2:5060 <02:35:16>
INVITE sip:192.168.1.2 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bK-YMa-3630;rport
From: <sip:change_me@192.168.1.1>;tag=WLJ-11782
To: <sip:192.168.1.2>
Vigor2862 Series User's Guide
1: Subnet 1, 2: Subnet 2, ...etc.
It means to enable / disable Bridge mode.
0: OFF
1: ON
e
l e
a n d : v o i p d e b u g
a n d : v o i p d e b u g
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to clear current log.
It means to show current log.
e
l e
879