Table of Contents
Advertisement
NOTE: Before beginning assembly, read the grain carts operator's manual and comply with all safety rules and
operation procedures.
Rear Endplate
Assemble endcap at the ground level . Attach the endplate to the endcap using 1/4" x 1/2" serrated flange hex
bolts and 1/4" serrated flange hex nuts . Tighten the hardware once finished.
Endcap Assembly
1/4" x 1/2" SF Hex Bolts
Rear Endcap
1/4" SF Hex Nut
3
Advertisement
Table of Contents
