Table of Contents
Advertisement
The process below is to be completed at the front and back ends of the cart .
•
Unroll the roll tarp completely and let it hang down to its lowest point on the opposite auger side .
•
Line bracket up below where the roll tube ends and right behind the lip on the endcap, and use 1/4" x
1-1/2" self tapping screw to attach bracket to the cart . (See Pictures 1 & 2)
•
Roll the tarp all the way up .
•
Drape rope completely across the cart . Pull the rope to eliminate slack then let hang so that rope is
not too tight and aligned right behind endcap lip . (See Picture 3)
•
Mark bracket where rope ends and fasten bracket to cart with 1/4" x 1-1/2" self tapping screws .
Picture 1
Tarp Rope
Picture 2
Picture 3
15
Advertisement
Table of Contents
