Hypercom M4230 User Manual page 78

7.5.5 DCC Settlement
As per Section 6.2, settlement for the Eftpos Professional device can occur via a
programmed terminal settlement (automatic settlement) or a manual settlement. If your
terminal is set up for an automatic settlement, your DCC transactions will settle immediately
after your AUD transactions. A separate report will print for your DCC transactions, and they
will also be posted to your account as a separate deposit.
Note: A settlement can only be performed once in a 24-hour period.
To process a manual settlement of your DCC transactions:
TERMINAL DISPLAY
DATE
ENTER AMOUNT
MERCHANT FUNCTION
ENTER FUNCTION
1. WSB
2. DCC
SETTLEMENT
1. SETTLEMENT
2. LAST 7 SETTLEMENT
MERCHANT NAME
DO SETTLEMENT DCC?
NO
Sending Req
RESPONSE
SETTLEMENT COMPLETE
76
EFTPOS PROFESSIONAL MOBILE GPRS USER GUIDE
TIME
CLEAR
HOSTS
YES
COMMS
PROCEDURE
Press Function.
Press 8 and then ENTER for Settlement options.
Press 2 for DCC and press Enter.
Press 1 and Enter to perform a settlement.
Process the settlement by pressing the soft key next
to YES or pressing Enter, otherwise select NO or
press Cancel.
The terminal is connecting to the bank and
processing the settlement.
This screen will display once settlement is
completed successfully and the Settlement Report
will print.
ADDITIONAL TERMINAL FEATURES/OPTIONS