Hypercom M4230 User Manual page 16

To start Training Mode:
TERMINAL DISPLAY
DATE
ENTER AMOUNT
MAIN MENU
1. LOGON
2. BATCH
3. TERMINAL
4. REPRINT
TERMINAL
1. VIEW
2. TRAINING
3. PASSWORDS
4. COMMS
5. LOCK
MERCHANT FUNCTION
ENTER FUNCTION
***TRAINING MODE***
ENTER TRAINING MODE
NO
DATE
*TRAINING MODE*
ENTER AMOUNT
14
EFTPOS PROFESSIONAL MOBILE GPRS USER GUIDE
PROCEDURE
Press MENU.
Or:
TIME
Press FUNCTION.
The next step depends on whether you pressed
MENU or FUNCTION key.
1. If you pressed MENU, press 3 and then ENTER
to select TERMINAL.
1a. Press 2 and ENTER to select TRAINING.
2. If you pressed the FUNCTION key, press 33 and
then ENTER for TRAINING.
CLEAR
Press the soft key next to YES or press ENTER to
start TRAINING MODE.
YES
TIME
When the terminal runs in training mode the idle
screen will display TRAINING MODE.
PROCEDURES