Shifts; How To End A Shift - Hypercom M4230 User Manual

6.9

Shifts

The terminal's shift facility is useful when you need separate reports for each work shift. It is
independent of the settlement times. This function allows you to keep a record of users who
have operated the terminal in a shift period.
Note:
Shift totals are independent from settlement times. The Shift totals are not reset
●
when the settlement is performed.
To start using the shift functionality you will need to clear any totals from this function by
ending the existing shift.

6.9.1 How to End a Shift

TERMINAL DISPLAY
DATE
ENTER AMOUNT
REPORTS
1. TXN LISTING
2. SUBTOTAL REPORT
3. SHIFT TOTALS
SHIFT TOTALS
1. SUB-TOTALS
2. PREVIOUS TOTALS
SELECT USER ID --
1. ALL USERS
2. USER ONE
3. USER TWO
4. USER THREE
5. USER FOUR
6. USER FIVE
SHIFT TOTALS
RESET SHIFT TOTALS?
NO
EFTPOS PROFESSIONAL MOBILE GPRS USER GUIDE
PROCEDURE
TIME
Press REPORTS.
Press 3 and ENTER for SHIFT TOTALS.
Press 1 and ENTER for SUB-TOTALS.
If no users are enabled, a report will print at
this point.
If USERS are enabled on the terminal this screen
will appear.
Press ENTER to select ALL USERS.
This option should be highlighted to select.
A report will print.
End the current and start a new shift by pressing
the soft key next to YES or pressing ENTER. This will
reset shift totals to zero and print a report
YES
(if available).
REPORTING FUNCTIONS
61