Hypercom epic T7 Plus Installation Manual

Cleaning the T7 Plus
Use the following procedure to clean the casing and the printer mechanism of the T7 Plus :
W :
ARNING DO NOT use undiluted ammonia, or abrasive cleaners.
- Apply denatured alcohol or a Windex ® -type product to a clean, soft, non-abrasive,low-lint cloth.
Carefully wipe the entire terminal.
- As needed, use anti-static compressed air to clean in and around the printer mechanism.
Supply Information
If you are unable to purchase items such as paper through your bank or processor,
contact Merchant Supplies at 800.522.8710.
Compliance
This equipment is compliant with the following:
• FCC Part 15 (ICES-003)
• FCC Part 68 (CS-03)
• CTR21
• EN55022
• EN55024
Adding Value to Innovation
World Headquarters
2851 West Kathleen Road • Phoenix, AZ 85053
602.504.5000 • 877.HYPERCOM within USA • Fax: 602.504.5166
e-mail: info@hypercom.com • web: www.hypercom.com
© Hypercom Corporation, 2002. Printed in the United States of America.
940365-002 Rev. D
• EN60950
• CISPR 22
• AS/NZS 3260
• AS/NZS 3548
10/02
T7 Plus
T E R M I N A L
I N S TA L L AT I O N
G U I D E