Procedures; Inserting A Chip Card - Hypercom M4230 User Manual

4.0 Procedures

4.1

Inserting a Chip Card

When your terminal is enabled for chip card acceptance, chip cards are inserted into the
terminal and left there for the duration of the transaction.
The chip card reader is located at the bottom of the terminal below the keypad.
Chip Card
Reader
Chip Card
1. Check the terminal is displaying the message INSERT/SWIPE CARD.
2. Hold the card face-up with the chip towards the terminal.
3. Insert the card as far as it will go into the reader and continue processing the transaction.
4. Leave the card in the terminal until prompted to remove.
5. If there is an error with reading the chip on the card the terminal may prompt you to
swipe the card.
12
EFTPOS PROFESSIONAL MOBILE GPRS USER GUIDE PROCEDURES