Configuring The External Relay - Federal Signal Corporation SmartSiren Platinum Series Software Manual

Configuring the External Relay

Configuring the External Relay
There are no default settings for the External Relay.
To assign an External Relay function to a button:
1. Click a button in the Button Configuration Module.
2. If the External Relay pane is not in front of the other Device Selection panes, click the External
Relay tab.
3. Select how you want the button to operate by clicking an option button in the Button Control
pane. If you want the button to act as a timer, select the duration from the drop-down list. Some
buttons have the additional Button Control option to be Exclusive. They turn on a function when
pressed and turn off the button that was pressed previously in the same row.
82
Button Function Limits
The functions for all buttons (except Slide Switch 3, which accepts a limit of 20)
are limited to a maximum of 10.
SmartSiren Platinum Series