Signalmaster Types - Federal Signal Corporation SmartSiren Platinum Series Software Manual

Configuring the SignalMaster
Function
Front Lightbar
Rear External Serial
Rear Lightbar
Rear External Serial
Rear Upper ILS
Rear Lower ILS
Rear External Discrete
6-Head Version
8-Head Version
57

SignalMaster Types

Description
Six or eight SignalMaster light heads that are built into the
front of a serially-controlled Federal Signal lightbar.
A standalone serially-controlled SignalMaster that is mounted
on the exterior of the vehicle facing the front. The lightbar is
connected to a serial port on the SmartSiren Platinum Siren
Amplifier through a RS-485 cable.
Six or eight SignalMaster light heads that are built into the rear
of a serially-controlled Federal Signal lightbar.
A standalone serially-controlled SignalMaster lightbar that
is mounted on the exterior of the vehicle facing the rear.
The lightbar is connected to a serial port on the SmartSiren
Platinum Siren Amplifier through an RS-485 cable.
A standalone Solaris ILS SignalMaster lightbar that is mounted
on the inside of the upper rear windshield. The lightbar is
connected to a serial port on the SmartSiren Platinum Siren
Amplifier through an RS-485 cable.
A standalone Solaris ILS SignalMaster lightbar that is mounted
on the inside of the lower rear windshield. The lightbar is
connected to a serial port on the SmartSiren Platinum Siren
Amplifier through an RS-485 cable.
A non-serially-controlled standalone SignalMaster lightbar that
is mounted facing the rear of the vehicle.
The 6-Head Version has wires that connect to SM pins 2
through 7 on the SmartSiren Platinum Siren Amplifier.
The 8-Head Version has wires that connect to SM pins 1
through 8 on the SmartSiren Platinum Siren Amplifier.
1
11 1 1 1
SmartSiren Platinum Series
SM
2 3 4 5 6 7 8
2 3 4 1 2 3 4
AUX INPUT