Troubleshooting Your Ip Connection In Windows Vista/7 - Federal Signal Corporation SmartSiren Platinum Series Software Manual

IP Connection Troubleshooting, Control-Pad Default Configuration and Worksheet

Troubleshooting Your IP Connection in Windows Vista/7

If the Connection Status Pane displays the message "Not Connected to Smart Siren Platinum Control
Pad" after you have properly connected the system and tried to establish an IP connection between the
control pad and your computer:
1. Set up and verify the IP connection between the control pad and your computer:
a) To power the control pad, turn the ignition key to the accessories position. When powered on,
the control pad automatically provides a IP address to the computer.
b) In the Start menu, right-click Network and select Properties.
c) In the Network and Sharing Center, click the link Manage Network
108
SmartSiren Platinum Series
Connections.