Lightbar Auxiliary Functions - Federal Signal Corporation SmartSiren Platinum Series Software Manual

Control pad configuration
Table of Contents

Advertisement

Configuring the Lightbar
Function
Right Alley
Left Alley
Work Light
Steady Burn
Front Light Cutoff
Rear Light Cutoff
White Light Cutoff
Takedowns
Flash Takedown/Alley
Scene Light
Scene Right
Scene Left
Dimming
Cruise Light
42

Lightbar Auxiliary Functions

Description
White light directed to the right side of the vehicle.
White light directed to the left side of the vehicle.
White light directed to the rear of the vehicle.
One or more lights that stay on and do not flash.
Turns off light on the front of the lightbar.
Turns off light on the rear of the lightbar.
Turns off all white lights: alley, takedown, work lights, scene,
and cruise lights.
White light directed to the front of the vehicle.
Flashes the takedown and alley lights.
White lights typically used in pairs to illuminate the work areas
around the perimeter of the vehicle.
Scene light on the front right of the lightbar
Scene light on the front left of the lightbar
Dims the lights approximately 50 percent to prevent blinding
approaching drivers at night.
The outer ends of the lightbar dim to eliminate the disorienting
effect of flashing lights.
SmartSiren Platinum Series
continued on next page

Advertisement

Table of Contents
loading

Table of Contents