Chapter 8 Configuring The External Relay; An Overview Of The External Relay - Federal Signal Corporation SmartSiren Platinum Series Software Manual

CHAPTER 8
Configuring the External Relay

An Overview of the External Relay

The External Relay is the Federal Signal Model 660100 Relay Module/Two-Channel Flasher. It is used
either in place of, or in addition to, the SmartSiren Platinum Siren Amplifier in the Convergence Network.
The Model 660100 connects to the SmartSiren Platinum Siren Amplifier through an RS-485 serial cable.
The relay controls up to four different devices. Two of the devices can be flashing perimeter lights, such
as the Impaxx or Viper that are activated into the built-in two-channel flasher. There are 12 selectable
® ®
flash patterns and two options to alternate the flashing of two or more lights. For more information, see
Federal Signal Doc. No. 2562431.
Pane for SignalMaster button
Pane all other buttons
81