Siren Function (Buttons 1-15); Siren Control (Buttons 1-15); Siren Control: Horn Ring - Federal Signal Corporation SmartSiren Platinum Series Software Manual

Configuring the Siren
Function
Wail
Wail Coast Down
Yelp
Yelp Coast Down
Priority
High/Low
Radio
Standby
Air Horn
Manual
Function
On Power-Up
Siren Dependent Disable
Function
Horn Ring On Power-Up
69
Siren Functions: Buttons 1–15
Description
Continuous wailing up-and-down tone.
Wail tone that falls in frequency after the tone is turned off.
Continuous rapid warbling tone.
Rapid warbling tone that falls in frequency after the tone is turned off.
Continuous rapid yelp tone.
Distinctive two-tone sound.
Incoming radio messages are amplified by the siren and rebroadcast
over the siren speaker.
Turns off all siren tones, except Air Horn and Manual. Standby is
available with Buttons 1 and 6.
A traffic-clearing loud blast of sound.
Peak-and-wail tone.
Siren Control: Buttons 1–15
Description
Each press of the horn button steps through a siren tone—
Wail, then Yelp, and finally Priority—until the fourth press
turns off the siren tone.
Turns off the Siren Dependent Enable, which restricts siren
activation to a slide switch position.

Siren Control: Horn Ring

Description
Turns on the Horn Ring Transfer function when the SmartSiren
Platinum system is powered up.
SmartSiren Platinum Series