Signalmaster Default Settings - Federal Signal Corporation SmartSiren Platinum Series Software Manual

Configuring the SignalMaster
SignalMaster lights build directional patterns by sequentially activating six or eight amber light heads.
Each lamp remains lit until the pattern is completed. SignalMaster lights also flash up to 14 different
warn patterns.
SignalMaster types are either standalone lightbars or are integrated into the front or rear of a full-
featured Federal Signal lightbar. Lightbar models include the Arjent S2, Legend, Raydian S2, Valor, and
Vision SLR. When part of a full-featured lightbar, SignalMaster light heads can be any color, except when
they also serve as Stop/Turn/Tail LEDs, Worklights, and Takedown lights.

SignalMaster Default Settings

Before you begin, you may want to review these SignalMaster default settings. For an keypad view of
the default settings, see the table in the appendix on page 115.
Button
SignalMaster
Warn
* The Button Control Module is not available because the option cannot be changed.
45
Button Control* Signal Type
Momentary Rear Lightbar
Rear External Discrete,
8-Head Version
Momentary Rear Lightbar.
Rear External Discrete,
8-Head Version
SmartSiren Platinum Series
Pane for Slide Switch buttons
Pattern
Step-Through selection of Left,
Right, Center Out patterns
(not configurable)
Step-through warning Patterns 1
through 4
Pane for Buttons 1–15
and Inputs 1–4