APPENDIX
IP Connection Troubleshooting, Control-Pad
Default Configuration and Worksheet
Troubleshooting Your IP Connection in Windows XP
If the Connection Status Pane displays the message "Not Connected to Smart Siren Platinum Control
Pad" after you have properly connected the system and tried to establish an IP connection between the
control pad and your computer:
1.
Check the IP connection between the control pad and your computer:
a)
To power the control pad, turn the ignition key to the accessories position. When powered on,
the control pad automatically provides a IP address to the computer.
b) In the Start menu click Connect to and select Open.
103
SmartSiren Platinum Series