Table of Contents
Advertisement
Configuring the ILS System
8.
When you are finished, press CTRL + S, or select Save or Save As from the File menu, and save
the configuration file in the folder you created on your hard drive.
Configuring the ILS System for the Slide Switch Buttons
1.
Click a Slide Switch button.
2.
If the ILS pane is not in front of the other Device Selection panes, click the ILS tab.
93
Pop-Up Message: "Overwriting the Default Configuration"
When you select Save for the first time, the message "Trying to overwrite
protected default configuration" appears. Click OK. In the Save As dialog box,
navigate to the folder you created for your configuration files and save the file
under a new name. When you click Save again before closing the application,
it updates your renamed file by overwriting it.
Button Function Limits
The functions for all buttons (except Slide Switch 3, which accepts a limit of 20)
are limited to a maximum of 10.
SmartSiren Platinum Series
Advertisement
Table of Contents
Troubleshooting
