Ils System Functions - Federal Signal Corporation SmartSiren Platinum Series Software Manual

Configuring the ILS System
Function
Front ILS
Rear Lower ILS
Rear Upper ILS
Front Light Cutoff
Rear Light Cutoff
Flashing Takedown
Dimming
Takedown
Steady Burn
97

ILS System Functions

Description
A single-level LED lightbar that mounts on the inside of the
front windshield. It uses ROC (Reliable On Board Circuitry)
technology, and Solaris
A single-level LED lightbar that mounts on the rear deck of an
emergency vehicle. It uses ROC (Reliable On Board Circuitry)
technology, and Solaris
A single-level LED lightbar that mounts on the upper part of the
rear windshield of an emergency vehicle. It uses ROC (Reliable
On Board Circuitry) technology, and Solaris
Turns off light on the front of the lightbar.
Turns off light on the rear of the lightbar.
Flashes the takedown and alley lights.
Dims the lights approximately 50 percent to prevent blinding
approaching drivers at night.
White light directed to the front of the vehicle.
One or more lights that stay on and do not flash.
SmartSiren Platinum Series
S2 reflectors.
®
S2 reflectors.
®
®
S2 reflectors.