Inverter Settings - Mitsubishi 700 Series Instruction Manual

INVERTER SETTINGS

3
INVERTER SETTINGS
The inverter parameters listed in Table 16 are critical for overall operation of the end-to-end
communication system. Some of these parameters must be set to specific values, and some may have
multiple allowable settings depending on the desired operation of the overall application. Although there
may be many other inverter parameters that will require configuration for your specific application, it is
important to understand the manner in which the following parameters will impact successful
communications with, and control of the inverter.
Parameter
Number
79
338
339
340
342
550
232, 233, 234, 235
236, 237, 238, 239
888, 889
34
Table 16: Inverter Settings
Name
Operation mode selection
Communication operation command source
Communication speed command source
Communication startup mode selection
Communication EEPROM write selection
NET mode control source selection
IP address
Subnet mask
Default gateway address
Refer to
Page
38
42
42
38
46
42
35
35
35