Bit
Value
0
Speed Out Of Tolerance
1
Control Requested
9
0
No Control Requested
Frequency Reached Or
1
Exceeded
10
0
Frequency Not Reached
11 - 15
Not used
---
Significance
Actual value differs from the reference value or
is outside of the tolerance as indicated by SU.
Refer to register 100 bit 3.
Control by PLC is possible when the operation
mode status (register 101) is reporting network
operation.
Control is not possible by the controller when the
operation mode status (register 101) is not
reporting network operation mode. The inverter
must be explicitly set to network operation
mode.
The actual value ≥ max reference value. Refer
to Pr. 1 (maximum frequency).
The actual value < max reference value. Refer
to Pr. 1 (maximum frequency).
---
PROTOCOL-SPECIFIC INFORMATION
Description
9
235