Mitsubishi 700 Series Instruction Manual page 167

PROTOCOL-SPECIFIC INFORMATION
g) Select the "Edit Tags" tab again. Create another new tag by entering "data_array" in the next
blank Name field, and change its Data Type by typing in "INT[62]" in the Data Type field. This
tag is an array of INTs that will be able to hold up to 62 16-bit registers from the inverter. Always
make sure that the destination tag size is large enough to hold all elements to be read.
2) Add a MSG instruction to the main program.
a) Double click "MainRoutine" under Tasks
...MainTask ...MainProgram in the controller
organizer view.
b) Right click on the first ladder logic rung in the
MainRoutine window and select "Add Ladder
Element..."
c) The "Add Ladder Element" window appears.
d) Select the "MSG" instruction in the Input/Output
folder. Refer to Figure 56.
e) Click OK.
3) Add an XIO element to the main program.
a) Right click on the ladder logic rung containing the MSG instruction in the MainRoutine window
and select "Add Ladder Element..." again.
b) The "Add Ladder Element" window appears.
154
Figure 56: Adding a MSG Instruction