Mitsubishi 700 Series Instruction Manual page 133

PROTOCOL-SPECIFIC INFORMATION
Instance Byte
0
1
20
2
3
0
1
21
2
3
Mapping Detail
Run Fwd: forward rotation command (0=forward rotation off, 1=forward rotation on). Maps to inverter
register 1, bit 1 (forward rotation command).
Run Rev: reverse rotation command (0=reverse rotation off, 1=reverse rotation on). Maps to inverter
register 1, bit 2 (reverse rotation command).
Fault Reset: Inverter reset command (0=no action, 0→1 rising edge=reset value 0x9966). Maps to
inverter register 5 (inverter reset).
120
Table 30: Output Instances 20 and 21 Detail
Bit 7 Bit 6 Bit 5
NetRef NetCtrl
Bit 4 Bit 3
Speed Reference (Low Byte)
Speed Reference (High Byte)
Speed Reference (Low Byte)
Speed Reference (High Byte)
Bit 2 Bit 1 Bit 0
Fault Run
Reset Fwd
Fault Run Run
Reset Rev Fwd