PROTOCOL-SPECIFIC INFORMATION
9.8.4 Remote Device Settings
In the studio's Project panel, navigate to A7NETH-2P...Ethernet... SLMP Client...Remote Device.
Name
This 32-character (max) field is strictly for user reference: it is not used at any time by the driver.
IP Address
Defines the destination IP address. This is the IP address of the targeted remote server device.
Transport Type
Select TCP or UDP.
TCP Port
This field is only enabled only if the Transport Type is set to TCP. Defines the destination TCP port
(1...65535). This is the "listening" port on the server.
UDP Port
This field is only enabled only if the Transport Type is set to UDP. Defines the destination UDP port
(1...65535). This is the "listening" port on the server. This also defines the local source port. Ensure that
this port assignment is unique, and does not conflict with ports utilized by other drivers.
222