Ethernet Settings; Authentication - Mitsubishi 700 Series Instruction Manual

MITSUBISHI CONFIGURATION STUDIO
After pasting an object, the object's configurable fields can then be modified with valid values (where
applicable).
Note that the studio allows you to copy and paste items between different locations, including different
devices. This is useful for copying partial configurations from one device to another.
Reordering Objects
Objects can be reordered in the Project panel by dragging the item to the desired location. If the item is
dragged outside of the items in the project tree, it will be moved to the end.
5.3

Ethernet Settings

The Ethernet Settings panel contains Ethernet-related items that are not specific to any given protocol.
These settings must be appropriately configured regardless of any Ethernet control protocols that may
be enabled. The Ethernet Settings panel is then available whenever the Ethernet port is selected in
the Project panel.

5.3.1 Authentication

Be sure to make a note of the new settings whenever authentication credentials are changed, as they
must be entered whenever the web page is accessed or an FTP session is initiated.
User Name
The username is case-sensitive and can contain letters ("a...z" and "A...Z") and numbers ("0...9").
66