Mitsubishi 700 Series Instruction Manual page 17

PRE-OPERATION INSTRUCTIONS
Item
Power Supply
Grounding
LED Indicators
USB Port
Item
Number of Ports
Standard
Communication Speed
and Duplex
Connector Type
Auto MDI-X
Cable Type
Cable Length
Topologies
4
Table 2: General Hardware Specifications
Directly powered by the inverter
Referenced to inverter's 5V power supply / isolated from inverter
control power common
Module Status, Network Status, 2 x Ethernet Link/Activity
USB 2.0, mini-B 5-pin
Table 3: Ethernet Hardware Specifications
2 (internal switch)
IEEE 802.3 10BASE-T/100BASE-TX Ethernet compliant
10Mbps half/full, 100Mbps half/full (auto sense optimal speed and
duplex)
RJ-45 Shielded
Yes (supports all straight-through and cross-over cables)
CAT5-type 8-conductor UTP patch cables
100m per segment max
Star/Tree, Linear/Bus/Daisy-chain, Ring (MRP / DLR)
Description
Description