Binary Input Object Settings - Mitsubishi 700 Series Instruction Manual

PROTOCOL-SPECIFIC INFORMATION
Units
Select the desired units from this dropdown menu. If the desired units are not available in the dropdown
menu, select "Other Units" and enter the appropriate enumerated value (as defined by the BACnet
Specification) in the "Unit Value" field.
Unit Value
This field is enabled only when the "Units" selection is set to "Other Units". Enter the appropriate
enumerated value (as defined by the BACnet Specification.)
Relinquish Default
Defines the default value to be used for an object's present value property when all entries in the
object's priority array are NULL.
9.4.7.4

Binary Input Object Settings

Object Name
The name of the BACnet object. Enter a string of between 1 and 32 characters in length. All object
names must be unique within a node.
Instance
The BACnet object's instance number. Enter a value between 0...4194302 (0x0...0x3FFFFE).
9
197