Controllogix Example: Eds Add-On Profile (Aop) Ac/Dc Drive Profile - Mitsubishi 700 Series Instruction Manual

PROTOCOL-SPECIFIC INFORMATION

9.2.11.2 ControlLogix Example: EDS Add-On Profile (AOP) AC/DC Drive Profile

This section will demonstrate how to configure the EtherNet/IP AC/DC drive profile I/O connection.
1) Complete all steps in section 9.2.11.
2) Locate the interface card in the 1756-ENBT/A branch under the "I/O Configuration" in the controller
organizer view. Right click on the interface card, choose "Properties", and select the "General" tab.
3) Configure the AC/DC Drive Profile connection. Refer to Figure 39.
138