Thermo Scientific Dionex Aquion RFIC Operator's Manual page 61

Thermo Scientific
2. If an autosampler is installed: Prepare and fill the sample vials, and then place them in the
autosampler tray or cassette. For detailed instructions, refer to the autosampler manual.
If an autosampler is not installed: Load the sample into the injection valve sample loop
through the sample port on the Dionex Aquion RFIC front door (see
with a syringe" on page
3. Load the sequence into a queue and start the run. Chromeleon performs a Ready Check
to verify that the instrument is ready for operation and that the instrument methods
specified in the sequence are error-free. If the Ready Check passes (and if another
sequence is not currently running), the sequence is started.
42).
Processing Samples
"To load samples
Dionex Aquion RFIC Operator's Manual
3
Operation
45