Thermo Scientific Dionex Aquion RFIC Operator's Manual page 145

Thermo Scientific
Autosampler
Automation using autosampler
Sequential or simultaneous injection May be available; dependent on autosampler
Online sample degassing
Online filtration
High automation flexibility
Physical specifications
Power requirements
Fuses
Operating temperature
Operating humidity range
Operating pressure
Control modes
USB communication protocol
Dimensions (h × w × d)
Weight
Decibel level
Dionex AS-AP, Dionex AS-DV Autosampler, or
third-party autosampler
capabilities
Optional feature; Dionex CRD 200 or Dionex CRD
300 required
Available with a Dionex AS-DV or an inline filter
Available with Chromeleon software and post-run
features
100 to 240 Vac, 50 to 60 Hz (auto-sensing power
supply; no manual voltage or frequency adjustment
required)
Two 3.15 amp fast-blow IEC 127 fuses (P/N 954745)
4 to 40 °C (40 to 104 °F); cold room-compatible
(4 °C) as long as system power remains on
5% to 95% relative humidity, noncondensing
35 MPa (5000 psi) maximum liquid path (tubing,
valve, columns, etc.)
Full control through Chromeleon software; alternative
control through TTL or relay closures (two relay
outputs, two TTL outputs, four programmable
inputs)
One USB input; one built-in USB hub with two
outputs
56.1 × 22.4 × 53.3 cm (22.1 × 8.8 × 21.0 in)
Note: Dimensions do not include Dionex EGC or
eluent reservoir.
51 lbs (23 kg) net weight
64 lbs (29 kg) with boxes
<52 dBA
Dionex Aquion RFIC Operator's Manual
A
Specifications
129