Thermo Scientific Dionex Aquion RFIC Operator's Manual page 111

Thermo Scientific
Figure 49. Dionex EGC in the service area
8. Disconnect the
EGC IN
Dionex EGC (see Figure
Figure 50. Disconnecting the Dionex EGC inlet and outlet lines
EGC OUT
EGC IN
OUTLET
port
9. Follow the instructions in the Dionex EGC manual to prepare an expended cartridge for
disposal or to store a partially used cartridge for later use.
To install the new Dionex EGC (KOH, LiOH, NaOH, or MSA)

1. Remove the new Dionex EGC from the shipping box.
2. Orient the Dionex EGC with the fittings facing up and remove the plugs from the
and ports (see
OUTLET
and lines from the
EGC OUT
50).
INLET port
Figure 51).
Replacing the Dionex EGC
and ports on the
INLET OUTLET
Dionex Aquion RFIC Operator's Manual
6
Service
INLET
95