Thermo Scientific Dionex Aquion RFIC Operator's Manual page 121

Thermo Scientific
10. Remove the plug from the Dionex EGC vent opening and connect the cartridge
line.
CAUTION Failure to remove the vent plug before beginning operation with the Dionex
EGC will allow an excessive buildup of electrolysis gas, which can result in an explosion.
MISE EN GARDE Si vous ne retirez pas le bouchon d'évent avant de commencer à utiliser
le Dionex EGC, vous risquez une accumulation excessive de gaz d'électrolyse, pouvant
entraîner une explosion.
VORSICHT Wenn der Entlüftungsstopfen nicht entfernt wird, bevor der Dionex EGC in
Betrieb genommen wird, kann sich übermäßiges Elektrolysegas bilden, was zu einer
Explosion führen kann.
To record the Dionex K

The serial number is printed on the Dionex EGC label.
1. Open the Instrument Configuration Manager.
2. Double-click the Aquion IC System icon under the instrument.
3. In the Properties dialog box, click the Eluent Generator tab (see
Figure 64. Properties dialog box: Eluent Generator tab page
4. Select the EGC-1 check box.
5. Enter the serial number of the Dionex EGC.
CO EGC serial number in Chromeleon
2 3
Replacing the Dionex EGC
Figure 64).
Dionex Aquion RFIC Operator's Manual
6
Service
VENT
105